Research & Consultancy

The Department has signed the MoU with the following companies to organize the project work to the engineering students like Workshops, Seminars, Conferences, Symposium, Short term / refresher courses, study visits for students and in the process assess top talent students.

• CADDAM Technologies Pvt. Ltd.,
• SHIMI Designs and Consulting Engineers Private Ltd.,
• MOU signed with M&H Progressive Skills Pvt Ltd on 20.09.19.

• Dr.M.Durairaj , PRODUCTIVITY ENHANCEMENT BY ADAPTING AUTOMATION CONCEPTS USING SPECIAL MODIFIED PROGRESSIVE TOOL IN A PRESS SHOP , Published IN NCRASEM – 2020
• Dr.M.Durairaj, EXPERIMENTAL INVESTIGATION OF MACHINING PARAMETERS FOR STAINLESS STEEL 304 MATERIAL WITH COPPER TOOL BY USING ECM PROCESS, Published IN NCRASEM – 2020
• Dr.M.P.Natarajan, CONTROL AND MONITORING OF A INTELLIGENT TANK CLEANING SYSTEMS, Published IN NCRASEM – 2020
• Dr.M.P.Natarjan, EXPERIMENTAL INVESTIGATION OF DATES SEEDS POWDER REFINFORCED POLYMER, Published in NCRASEM 2020.
• Dr.M.P.Natarajan, OIL SKIMMER USING DISK PLATE, Published in NCRASEM 2020
• Dr.P.Santhanamoorthy, TRIBOLOGICAL ANALYSIS OF DATES SEEDS FILLER REINFORCED BIO COMPOSITE, Published in NCRASEM 2020
• V.Pugalendhi, ANALYSIS OF VISCOELASTIC PROPERTIES OF NATURAL FIBRE REINFORCED BIO MATERIAL, Published in NCRASEM 2020
• V.Pugalendhi, EVALUATION OF DUAL ROBOTIC ARM WITH SINGLE DRIVE SYSTEM, Published in NCRASEM 2020
• V.Pugalendhi, AIR CLEANER ASSEMBLY WITH INTEGRATED ACOUSTIC RESONATOR, Published in NCRASEM 2020
• R.Subash, COMPARATIVE MECHANICAL BEHAVIOUR ANALYSIS WITH POST WELD HEAT TREATMENT OF AISI – 0, Published in NCRASEM 2020
• R.Subash, DEISGN AND FABRICATION OF AUTOMATIC MATERIAL HANDELING SYSTEM FOR TRIMMING PRESS MACHINE, Published in NCRASEM 2020.
• R.Subash, MATERIAL ANALYSIS OF MOTOTRISED HANDLE BAR FOR WHEEL CHAIR, , Published in NCRASEM 2020
• R.Subash, OVERVIEW OF MATERIAL ANALYSIS FOR AUTOMATIC SOLAR TRACKING SYSTEM MOUNTING STRUCTURE, International Journal of Engineering Applied Sciences and Technology ,ISSN:2455-2143 DOI: 10.33564
• R.Senthil Kumar, DESIGN AND ANALYSIS OF ALTERNATIVE MATERIAL FOR HYBRID HELMET, Published in NCRASEM 2020
• M.Mustafs Kamal Basha, MANUFACTURING OF BRAKE PAD USING SEA SHELL AS ORGANIC FILLER MATERIAL, Published in NCRASEM 2020
• M.Mustafs Kamal Basha, DESIGN AND DEVELOPMENT OF WEAR MEASUREMENT SYSTEM FOR DISK BRAKE, Published in NCRASEM 2020
• P.Shriram Kumaar Pandian, EXPERIMENTAL ANALYSIS OF MATERIAL OF E-BIKE FOR PERFORMANCE ENHANCEMENT, Published in NCRASEM 2020
• P.Shriram Kumaar Pandian, EXPERIMENTAL INVESTIGATION OF MECHANICAL BEHVIOUR OF TIG AND FSW AA7075,
• P.Shriram Kumaar Pandian, EXPERIMENTAL INVESTIGATION OF MECHANICAL BEHVIOUR OF FRICTION WELDED AA6061,Published in NCRASEM 2020
• P.Shriram Kumaar Pandian, ANALYSIS AND PERFORMANCE ENHANCEMENT OF TURBO VENTILATOR, Published in NCRASEM 2020
• P.Shriram Kumaar Pandian OVERVIEW OF MATERIAL ANALYSIS FOR AUTOMATIC SOLAR TRACKING SYSTEM MOUNTING STRUCTURE, Published in NCRASEM 2020
• K.Jagadeeshwaran, DEVELOPMENT AND EVALUATION OF BANANA-FLAXA BASED NATURAL FIBRE COMPOSITE, Published in NCRASEM 2020
• Durairaj1a, S.Gowri2,b “Optimization of Inconel 600 alloy Micro turning process using Grey Relational Analysis”, published in Advanced Materials Research Vol. 576 (2012) pp 548-551,Trans Tech Publications, Switzerland, doi:10.4028/www.scientific.net/AMR.576.548
• M. Durairaj1, a, S.Gowri2, b, M.H.Gauthamkumar3, c, M. Ashok kumar3, d, R.Aishwarya3, e “Optimization of Wire Cut Electrical Discharge Machining of Inconel 800 using Grey Relational Analysis”, published in Advanced Materials Research Vol. 576 (2012) pp 552-555, Trans Tech Publications,Switzerland,doi:10.4028/www.scientific.net/AMR.576.552
• M.Durairaj, S.Gowri “Parametric Optimization for Improved Tool Life and Surface Finish in Micro Turning using Genetic Algorithm”, published in Procedia Engineering 64 (2013)878–887
• M. Durairaj, D.Sudharsun, N.Swamynathan, “ Analysis of Process Parameters in Wire EDM with Stainless Steel using Single Objective Taguchi Method and Multi Objective Grey Relational Grade,, published in Procedia Engineering 64 ( 2013 ) 868 – 877
• M.Durairaj, S.Gowri, P.SriBalakumaran, S.Subash and J.M.A.Thoufiq Abdul Aziz ‘”Experimental Investigation of process parameter in wire cut electrical discharge Machining Using Titanium Alloy” , published in the International Journal of Mechanical Engineering and Material sciences ,IJMEMS,6(2) July – December 2013,pp.159 – 162
• M.Durairaj, S.Gowri, D.Sudharsun, N.Swamynathan, “Application of Genetic Algorithm in the optimization of cutting parameters in wire cut EDM using stainless steel AISI 304”, published in the International Journal of Mechanical Engineering and Material sciences ,IJMEMS,6(2) July – December 2013,pp.123- 127
• M.Durairaj, S.Gowri, “Gravitational Search Algorithm – based Optimization of process parameters in Micro turning process”, published in the International Journal of Applied Mechanics and Materials ,(AMM) June 2014,
• M.Durairaj, S.Elanthirayan, K.Aanand and J.Poornachandran “Optimization Of Cutting Parameters In Wire cut EDM of D2 Die Steel Using Gravitational Search Algorithm”, published in the International Journal of Applied Mechanics and Materials, (AMM) June 2014
• M. Durairaj, M. Pradeep, P.Vignesh and M.Arun, “Investigation of Surface Roughness on R19 Steel Using Pin on Disc Apparatus”, published in the International Journal of Applied Mechanics and Materials ,(AMM) June 2014
• M.Durairaj, A.K.S.Ansari, M.H. Gauthamkumar, “Parametric Optimization of Wire Cut Electrical Discharge Machining”, published in the International Journal of Engineering & Technology,(IJET) 3, (2) (2014) 21-215.
• M.Durairaj,R.Rajamouli, “Surface roughness and kerf width Optimisation in WEDM using taguchi Method”, Published in Journals of chemical and pharmaceutical Sciences, ISSN: 0974-2115,pp,172-182
• M. Durairaj, S.Gowri, “Tool Condition Monitoring through Acoustic Emission Signal in Micro-Turning of Inconel 600 Alloy”, which was presented in the International Journal of Recent Innovations in Production Engineering (RIPE-2017), organised by the department of Production Engineering, MIT Campus, Anna University, Chennai, Tamilnadu, India on March 24-25, 2017.
• M. Durairaj, Mugeshkumar.M, “ Waste Heat Recovery and Regeneration in Two wheeler Engine”, was presented in the International conference on Engineering Materials and Processes (ICEMAP -2017) held during 9th and 10th March 2017 organised by Tagore Engineering college, Chennai.
• M.Durairaj, S. Sathish, D.Vignesh, S.Vishal, , “Optimization of the WEDM parameters on machining Incoloy 825 with zinc coated brass tool, which was presented in International Conference on Recent Advancement in Mechanical Engineering and Technology(ICRAMET -15), during April 23 – 24, 2015 in AarupadaiVeedu Institute of Technology.
• M.Durairaj, S.Elanthirayan, K.Aanand , J.poornachandran, ” Application Of Genetic Algorithm In The Optimization Of Cutting Parameters In Wire cut Edm Using D2 Die Steel” , was presented in the 3 rd International conference on Futuristic trends in Mechanical Engineering’ organized by Thiruvalluvar college of Engineering and Technology, held during 1st and 2nd March 2014.
• M.Durairaj, S.Gowri “Multi Objective Optimization of Machining Parameters in Micro Turning Process using Genetic Algorithm and Particle Swarm Optimization”, was presented in the International conference on Engineering Materials and Processes (ICEMAP -2013)held during 23rd and 24th May 2013 organised by Tagore Engineering college, Chennai.
• M.Durairaj, S.Gowri “Monitoring of Micro Turning Process of Inconel 600 Alloy through Acoustic Emission Signals”, was presented in the International conference on Engineering Materials and Processes (ICEMAP -2013)held during 23rd and 24th May 2013 organised by Tagore Engineering college, Chennai.
• M.Durairaj, S.Gowri, P.SriBalakumaran, S.Subash and J.M.A.Thoufiq Abdul Aziz ‘”Experimental Investigation of process parameter in wire cut electrical discharge Machining Using Titanium Alloy” , was presented in the International conference on Engineering Materials and Processes (ICEMAP -2013) held during 23rd and 24th May 2013 organised by Tagore Engineering college, Chennai.
• M.Durairaj, S.Gowri, D.Sudharsun, N.Swamynathan, “Application of Genetic Algorithm in the optimization of cutting parameters in wire cut EDM using stainless steel AISI 304”, was presented in the International conference on Engineering Materials and Processes (ICEMAP -2013) held during 23rd and 24th May 2013 organised by Tagore Engineering college, Chennai.
• M.Durairaj, V.Lakshman, G.JoeInigoFelix, D.karthick, S.Gowri,, “Influence of roughness parameters on Coefficient of friction of cast Iron” was presented in the International conference on Engineering Materials and Processes (ICEMAP -2013) held during 23rd and 24th May 2013 organised by Tagore Engineering college, Chennai.
• M.Durairaja, S.Gowri “Parametric Optimization for Improved Tool Life and Surface Finish in Micro Turning using Genetic Algorithm”, published in Procedia Engineering 64 (2013)878–887,available online at science direct. com/www.elsever.com/locate/procedia which was presented in the International Conference on DESIGN AND MANUFACTURING, IConDM 2013organised by (IITD&M) Kancheepuram, held during 18-20 July 2013, at Melakottaiyur, Chennai.
• M. Durairaj, D.Sudharsun, N.Swamynathan, “ Analysis of Process Parameters in Wire EDM with Stainless Steel using Single Objective Taguchi Method and Multi Objective Grey Relational Grade,, published in Procedia Engineering 64(2013)878–887,
• M.Durairaj 1, M.H.Gauthamkumar2, R.Aishwarya2, M. Ashok kumar2 ‘Optimisation of Electrical Discharge Machining of Inconel 800’, International conference on Futuristic trends in Mechanical Engineering’ organized by Thiruvalluvar college of Engineering and Technology, held during 28th and 29th of January 2012.
• M.Durairaj1,a, S.Gowri2,b “Optimization of Inconel 600 alloy Micro turning process using Grey Relational Analysis”, International Conference on Advances in Manufacturing and Materials Engineering, organized by International Islamic University Malaysia, held during 3-5 July 2012 , Kuala Lumpur, Malaysia.
• M. Durairaj1, a, S.Gowri2, b, M.H.Gauthamkumar3, c, M. Ashok kumar3, d, R.Aishwarya3, e “Optimization of Wire Cut Electrical Discharge Machining of Inconel 800 using Grey Relational Analysis”, International Conference on Advances in Manufacturing and Materials Engineering, organized by International Islamic University Malaysia, held during 3-5 July 2012 , at Kuala Lumpur, Malaysia.
• M.Durairaj1,, S.Gowri2, “Micro turning – A Review”, International Conference on Advanced Materials And processing(ICAMP-2011), organized by RMK Engineering College, held during 19-20 December 2011 , in RMK Engg, college, Chennai.
• M. Durairaj, P. Sri Balakumaran, S. Subash, J.M.A. Thoufiq Abdul Aziz, 2013, “Application of Taguchi Method in Optimization of Cutting Parameter for Kerf Width in Wire EDM” Proceedings of the National Conference on Fascinating Advancements in Mechanical Engineering, pp. 165–169,held
• M. Durairaj, D. Sudharsun, N. Swamynathan, 2013, “Surface Roughness Optimization in Wire Cut Electrical Discharge Machine using Taguchi Method” Proceedings of the National Conference on Fascinating Advancements in Mechanical Engineering, pp. 176,
• M. Durairaj, G.Joe Inigo Felix, V.Lakshman and D.Karthick. “Investigation of tribological properties of cast iron using pin on disc apparatus” National Conference on Recent Trends In Manufacturing Technology(RTMP 2013),
• M.Durairaj, N.Karthick , R.Karthik, R.Lokesh, “Minimization of work steering knuckle in four – wheeler, pp – 71,National conference on ‘Research Trends in Mechanical Engineering’
• M.Durairaj, N.Karthick, R.Karthik, R.Lokesh, Dr.S.Gowri ‘Design & fabrication of a Drill jig for a steering knuckle in four wheeler,’pp-173, National Conference on Advances in Mechanical Science “AIMS 2012”
• M.Durairaj1, M.H.Gautham kumar1, R.Aishwarya1, M. Ashok kumar1,Dr.S.Gowri2 ‘Optimisation of Electrical Discharge Machining using Taguchi’s Method’. Pp-168,
• M.Durairaj, B.Keerthi Barman, P.Prabhakaran, ‘ Optimisation of wire cut – Electrical Discharge machining of copper’, National Conference on Recent Trends In Manufacturing Technology(RTMP 2011),
• M.Durairaj, Dr.S.Gowri ‘Optimization of Micro wire-Electrical Discharge Machining For Alumunium alloy’- National Conference on Advances in Robotics, Precision Engineering & Manufacturing Techniques AIRPAM 2008,
• M.Durairaj, Dr.S.Gowri ‘Multi-Objective Optimization of Micro Wire -Electrical Discharge Machining’- National Conference on Trends and Innovations in Manufacturing Engineering (TIME)
• M. Durairaj, T. Hariharan, ” Enhance the Structural performance of a passenger car during frontal crash”, presented in the National Conference on Contemporary approach in Mechanical, Automobile and Building Sciences (NCCAMAB’14) organized by KarpagaVinayagar college of Engineering and Technology.
• M.Durairaj, P.T. Gokul Ram, ” Optimization study on automotive body structure weight reduction using structural adhesives”, presented in the National Conference on Contemporary approach in Mechanical, Automobile and Building Sciences (NCCAMAB’14) organized by KarpagaVinayagar college of Engineering and Technology.
• M.Durairaj, M.Pradeep, P. VigneshandM. Arun, “Experimental analysis of Tribological properties of R19 steel using Pin on Disc Apparatus”, presented in the National Conference on Contemporary approach in Mechanical, Automobile and Building Sciences (NCCAMAB’14) organized by KarpagaVinayagar college of Engineering and Technology.
• M.Durairaj, Sakthivel, “Investigation of micro wear abrasion and thermal expansion of grade 17 cast iron”, presented in the National Conference on Contemporary approach in Mechanical, Automobile and Building Sciences (NCCAMAB’14) organized by KarpagaVinayagar college of Engineering and Technology.
• M.Durairaj, R.Rajamouli, “Optimization of the WEDM parameters on machining Inconel x750 with Brass tool”, presented in the National Conference on Recent Advances in Science, Engineering and Management (NCRASEM -2015) , organized by Tagore engineering college on 20th March 2015.
• M.Durairaj, S. Sathish, D.Vignesh, S.Vishal, “Optimization of Electrical discharge Machining using Taguchi Method”, presented in the National Conference on Recent Advances in Science, Engineering and Management (NCRASEM -2015) , organized by Tagore Engineering College on 20th March 2015.
• Natarajan, MP, Rajmohan, B &Devarajulu 2012, ‘Experimental Studies of Non Asbestos Organic Brake Lining using Molybdenum Disulfide as Solid Lubricants’, European Journal of Scientific Research, vol.82, no.4, pp. 554-563.
• Natarajan, MP, Rajmohan, B &Devarajulu 2012, ‘Experimental Studies On Mechanical, Friction and Wear of Non Asbestos Organic Brake Linings for Light Motor Vehicle’, International journal of Mechanical and Industrial Engineering, vol.2, Issue 2, pp. 74-82.
• Natarajan, MP & Rajmohan, B 2013, ‘Heat Dissipation and Temperature Distribution of Brake Liner Using Steady State Analysis’, Applied Mechanics and Materials, vols. 249-250, pp. 712-717.
• Natarajan, MP, Rajmohan, B &Devarajulu 2016, ‘Performance of non-asbestosorganic brake liners for light motor vehicles’ Material Testing, 58 (2016)3, pp 252-259
• Natarajan, MP & Rajmohan, B 2011, ‘Studies on Mechanical, Friction and Wear of Non Asbestos Organic brake linings’, Proceedings of first national conference on Advancement & Recent Innovations in Mechanical Engineering, Chennai, pp.65-69.
• Natarajan, MP & Rajmohan, B 2011, ‘Effect of Ingredients on Mechanical and Tribological Characteristics of different brake liner material’, Proceedings of first international conference on Advanced Materials and Processing, Chennai, pp.132-141.
• Natarajan Venkatesan, Govindasamy Bhavani Bhaskar, Sudhakar Rajesh, KaliyaperumalPazhanivel and Suresh Sagadevan “Effect of Cloisite 30B nanoclay on the mechanical properties of HDPE nanocomposites “Materials Testing, Vol 59 (2017) 4 , pages 355-360 (Impact Factor 0.521- Annexure I)
• N Venkatesan, G B Bhaskar “Plate Bending Analysis By Boundary Element Method” Published in the International Journal of Production Technology and Management Research, page 39-44 Jan-June,2011 VOL 2 issue 1, ISSN 2229-3140.
• N. Venkatesan, G. B. Bhaskar, A. GnanavelBabu, J. Fredric, S. Vigneshan& R. Kalaiarasu “Mechanical Behavior of Various Volume Fractions of High Density Polyethylene Nanoclay Composite” Published in the International Journal of Mechanical Engineering and Materials Sciences Pages: 1-5 (Vol.5 No.1 2012), ISSN 0974-584X .
• N. Venkatesan, G. B. Bhaskar, K. Pazhanivel “Reinforcing Effect of Montmorillonite Nanoclay on Mechanical Properties of High Density Polyethylene Nano composites” International Journal of Applied Mechanics and Materials 591, 60-63,2014 .
• Venkatesan.N, Sabarish.R, Poyyathappan.K “Mechanical Properties of Montmorillonite Nanoclay Reinforced High Density Polyethylene Composites International Journal of Applied Environmental Sciences 9 (3), 865-870, 2014.
• K. Pazhanivel, G.B. Bhaskar, N. Venkatesan, P. Anandan “Influence of SMA Short Fibers on Mechanical Properties of Copper/GFRP Composites International Journal of Applied Mechanics and Materials 591, 64-67, 2014.
• K.Poyyathappan, G.B.Bhaskar, N.Venkatesan, K.Pazhanivel, G.Saravanan, S.Arunachalam “Dynamic Mechanical and Flexural characteristics of Glass- Carbon Hybrid Composites” International Journal of Applied Mechanics and Materials Vol. 591 (2014) pp 72-76 © (2014) .
• N.Venkatesan, V. Srinivasan “ Fabrication and Mechanical Properties of Natural Composite Material” International Journal of Applied Engineering Research, Special issue Vol. 22 (2014) pp 7743-7742 .
• N.Vasudevan, N.Venkatesan “Experimental Investigation and Optimization on Machining of Cryogenic Treated Al-SiC Composites” International Journal of Applied Engineering Research, Special issue Vol. 22 (2014) pp 7734-7742.
• K.Rajendran, N.Venkatesan “Experimental Investigation on Tensile and Flexural Properties of Kenaf/Pineapple Hybrid Natural Fiber Composites” International Journal of Research in Engineering and Technology, Vol 7, Issue 9 (2018) pp 155-160
• Presented and Published a Paper on “A Critical review on nano clay related polymer composite material” in International conference on Futuristic trends in Mechanical Engineering, at Thiruvalluvar College of Engineering and Technology, Vandavasi on 28th and 29th Jan 2012.
• Presented and Published a Paper on “Important Mechanical Properties of High Density Polyethylene /MMT Nano Composites” in the 2nd National conference on Fascinating Advancement in Mechanical Engineering (FAME-2013) Mechanical Engineering, at R.M.K College of Engineering and Technology, Chennai 601 206 on 11th March 2013.
• Tanniru Rajesh Babu, Sadayan Rajendra Boopathy, Sajja Rama Koteswara Rao, Guttikonda Raja Kumar, Gabbita Durga Janaki Ram, “Comparison of the welding behavior of P/M borated and I/M borated stainless steel” Materials Testing Sept- 2017, Vol. 59, No 9. Pages: 749–754.
• T. Rajesh Babu, A. Ashok Kumar “Influence of Heat Input on Dilution and characteristics of hard faced surfaces” International Journal of Applied Engineering Research Special Issue Vol. 9, No.22 (2014), pp. 7648-7652 (Scopus indexed and ISSN:09734562).
• T. Rajesh Babu, V. Srinivasan “Experimental study on heat transfer enhancement in a plain tube with wire coil inserts” International Journal of Applied Engineering Research Special Issue Vol. 9, No.22 (2014), pp. 7653-7658 (Scopus indexed and ISSN:09734562).
• B.Bhadru, G. Raja Kumar, B. Ravi, S. R. Koteswara Rao, T. Raja Babu, N. Konda Reddy “ Studies on salt fog corrosion behaviour of ferrous and non ferrous alloys” International conference on recent trends in engineering, materials, management and scences, Swarna bharathi institute of science and technology, Khammam, telangana, 25-27 oct 2018.
• G. Raja Kumar, S. R. Koteswara Rao, T. Raja Babu, B. Ravi “ Experimental investigation on microstructures of borated stainless steel 304B in different corrosion media” International conference on recent trends in engineering, materials, management and scences, Swarna bharathi institute of science and technology, Khammam, telangana, 25-27 oct 2018.
• N.Seguttuvan1,J.Lillymercy2, “Joint Strength Analysis of Single Lap Joint In Glass Fiber Composite Material”, International Journal of Applied Engineering Research, ISSN 0973-4562 Volume: 10, November 7(2015), pp. 16535-16545 (NOTE: IEEE FORMAT)
• N.Seguttuvan1,S.Raja2,R.Sasidharan3 “Selection of Alternative Material for Common rail Direct Injection System ”, International Journal of Engineering & Technology, 3(2)(2014), pp. 230-236(NOTE: IEEE FORMAT)
• D.Suresh , N.Manikandan, G.S.Bharath , A.Chandru , S.Senthil, C.B.Sekar , R.Sasidharan “EXPERIMENTAL INVESTIGATION ON USAGE OF BIODEGRADABLE FIBERS IN MANUFACTURING HYBRID COMPOSITE MATERIALS” International Journal of Mathematical, Engineering and Management Sciences 6(2) july-decemer,2013.pp.147-152
• Millon D selvan , V.Srinivasan ,C.B.Sekar,”an attempt to minimize lubricants in various metal cutting process”, International Journal of applied engineering research ISSN 0973-4562 Vol 9 no22(2014)pp7688-7692
• R.Subash&V.Srinivasan “Fabrication of a Tracking System in a Two wheeler using GSM and GPS Technology, International Journal Of Applied Engineering Research, Volume: 9, Issue: 22, pp. 7715 – 7719,
• V. Pugalendhi, V. Jose Ananth Vino, “Fabrication of solar powered air conditioner without compressor”, International journal of applied engineering research, 9, (22), 7638-7642.2014, 0973-4562.
• V. Pugalendhi, K. Annamalai, S. Lingesan and Krishnan, “Experimental Combustion Emission Characteristics of Premixed Charged Compression Ignition Engine”, International Journal of Pure and Applied Mathematics, Volume 119, No.12 2018, 2961-2973.
• M.MUSTAFA KAMAL BASHA & V.SRINIVASAN,” Fabrication of AlSIC MMC and analysis of its mechanical properties” International Journal of Appllied Engineering research , Volume: 9, Issue: 22, pp.7621- 7626 ISSN 09732-4562
• KOMAL KOUSHIK & M.MUSTAFA KAMAL BASHA ,” Improvement of Wear and corrosion resistence of AA2014 aluminium alloy by friction surfacing. International Journal of Appllied Engineering research , Volume: 9, Issue: 22, pp.7617- 7620 ISSN 09732-4562
• Saravanan. G, Arunraja. K. K, S. Thirumavalavan, G. B. Bhaskar, Vijayaraghavan. G. K. “structural and dynamic analysis of composite stator vanes in compressor”, International journal of applied Environmental sciences,. ISSN 0973-6077, vol 9, No 3, pp. 853-863 (2014)
• K.Poyyathappan, G.B.Bhaskar, N.Venkatesan, K.Pazhanivel, Saravanan.G, S.Arunachalam. “Dynamic Mechanical and Flexural characteristics of Glass-Carbon Hybrid Composites, Applied Mechanics and Materials Vol. 591 (2014) pp 72-76 © (2014)
• N.Arunkumar, C. Elanchezhian, and B. Vijaya Ramnath “Process Parameters Optimization for Friction Stir Welding Of AA7075 Aluminium Alloy Using ANOVA Technique”, Applied Mechanics and Materials, paper accepted for publication in April 2014 issue
• N.Arunkumar, C. Elanchezhian, P. Krishnakumar and B. Vijaya Ramnath “An Analysis of Optimize the Process Parameters of Friction Stir Welded AA7075 Aluminium Alloys”, International Journal of Mechanical and Manufacturing Technology, pp 187-190 Vol 2, Issue 2, (July – December) 2013
• N.Arunkumar, C. Elanchezhian, and B. Vijaya Ramnath “investigation of Process Parameters of Friction Stir Welded AA7075 Aluminium Alloys”, International Journal of Engineering Research, pp 130-132 Vol 4, ISSN 2319-6890, 22nd march 2014.
• R Praveen, International Journal of Applied Engineering Research (IJAER) –“Optimization of Composite as a Noise Retardant Material” (pg. 7627 – 7632) in the Vol 9 No: 22 (2014).
• R Praveen, International Journal of Applied Engineering Research (IJAER) –“Experimental Study on Macroscopic spray characteristics in direct injection Diesel engine” (pg. 7633 – 7637) in the Vol 9 No: 22 (2014).
• R Praveen, International Journal of Engineering and Technology (IJET) –“Experimental Study of Selective Catalytic Reduction System On CI Engine Fuelled with Diesel-Ethanol Blend for NOx Reduction with Injection of Urea Solutions” and ISSN : 0975-4024 in the Vol 6 No 2 Apr-May 2014.
• P.ShriramKumaar Pandian & R. Sabarish “ Analysis of Disc Brake Rotor Coning” International Journal of Applied Engineering research , Volume: 9, Issue: 22, pp.7698- 7707 ISSN 09732-4562
• P.ShriramKumaar Pandian &S.MAnavalan h “ Performance Analysis of Aluminium Alloy Al356 By using RSM ” International Journal of Applied Engineering research , Volume: 9, Issue: 22, pp.7708- 7714 ISSN 09732-4562
• P.ShriramKumaar Pandian , V.Jose Ananth Vino &C.M.Meenakshi “ Reduce Cycle time through Kanban Replenishment using streamlining material flow” International Journal of Applied Engineering research , Volume: 9, Issue: 22, pp.7814- 7819 ISSN 09732-4562
• G. Ramesh, Mr. K. Sivakumar, “Inferences on structural intergrity of Metal matrix composites using Felicity effect”, International Journal of Applied Engineering Research, 9(22), 7663-7666. ISSN: 0973-4562.
• G. Ramesh, Mr. Manoj, N. Senguttuvan, “Effect of Zinc on the wettability of Aluminium steel welded joint”, International Journal of Applied Engineering Research, 9(22), 7806-7813. ISSN: 0973-4562.
• S.Shivaswabnil, s.sukumar, N.yogesh and s.rajesh ,”comparative study on hybrid composite fiber with metal disc rotor” International Journal of Pure and Applied Mathematics, Volume 119, No.12 2018,3073-3080
• S.saravanakumar,p.sakthivel,S.Shivaswabnil, and s.rajesh ,”comparisonal study of pitch blade impeller and Rushton turbine in stirred tank for optimum fluid mixing ” International Journal of Pure and Applied Mathematics, Volume 119, No.12 2018,3037-3056
• G.Elumalai, G.B.Bhaskar, R.Subash “Controlling of Faulty Vehicles Using GSM and GPS Technology”, Applied Mechanics and Materials, Vol 591 (2014) pp 180-183.
• Subash, CM Meenakshi, K.SamuelJayakaran, C.Venkateswaran, R.Sasidharan “Fabrication of pedal powered hacksaw using dual chain drive”, International Journal Of Engineering & Technology, 3 (2) (2014) 220-223.
• P Santhana Moorthy, GB Baskar, S Gowri, “Mechanical Properties and Microstructure of glass carbon hybrid Composite”, Material Testing, 60, Nov 2018, pp 1131-1137.
• P Santhana Moorthy, Shiva Swabnil, GB Bhaskar, “Study on Drilling characteristics of Glass carbon Hybrid Composite laminates”, International Journal of Applied Engineering Research, ISSN 0973-4562, Vol 10, No 42, 2015.
• P Santhana Moorthy, GB Bhaskar, “Machining Analysis, Characteristics and application of Glass, CArbom and Glass carbon Hybrid Composites – A Review”, IJMEMS, 6(2), July-Dec 2013, pp153-157.
• Study on Erosion Corrosion behaviour of Gas Tungsten Arc Welded Duplex Stainless Steel using Taguchi Technique. R.Sasidharan , S.RajendraBoopathy, S.R. Koteswara Rao, B.Ganesamoorthi Journal of Corrosion Science and Engineering., Volume 17, Preprint 23 (2013).
• Effects of Nitrogen added Argon Gas flow rate on the Mechanical and Corrosion properties of Duplex Stainless Steel Gas Tungsten Arc welds. R.Sasidharan , S.RajendraBoopathy, S.R. Koteswara Rao Journal of Corrosion Science and Engineering., Volume 17, Preprint 22 (2013).
• Erosion Corrosion Behaviour of Duplex Stainless Steel Welds Using Slurry Jet Machine R.Sasidharan, S.RajendraBoopathy, K.Periyaswamy, S.R. Koteswara Rao, Achudham International Journal of Applied Environmental Sciences Volume 9, Number 3 (2014), pp. 871-878.
• Selection of alternative material for common rail direct injection system N. Senguttuvan , S. Raja, R.Sasidharan International Journal of Engineering & Technology, 3 (2) (2014) 230-236.
• Fabrication of pedal powered hacksaw using dual chain drive R. Subash , C.M. Meenakshi, K. Samuel Jayakaran , C. Venkateswaran, R.Sasidharan International Journal of Engineering & Technology, 3 (2) (2014) 220-223.
• Waste energy recovery in window air conditioning system, R. Sasidharan, V. Palaniswamy, C.R. Manibharathi, R. Pannerselvam, Venkatesan International Journal of Engineering & Technology, 3 (2) (2014) 179-184.
• Thermal analysis of metal-ceramic bonding using finite element method S. Gopinath, R. Sabarish , R. Sasidharan International Journal of Engineering & Technology, 3 (2) (2014) 179-184.
• Experimental investigation on usage of bioderadeable fibres in manufacturing hybrid composite Materials D. Suresh, N. Manikandan, G. S. Bharath, A. Chandru, S. Senthil, C. B. Sekar, R. Sasidharan IJMEMS, 6(2) july- December 2013, pp. 147-152
• Optimization of bead geometry for duplex stainless steel GTA welds using the Taguchi approach R.Sasidharan , S.RajendraBoopathy, S.R. Koteswara Rao, S.Vijayan Materials testing., Volume 58 , no 4 (2016), pp.312-318.

• Mr. V. Pugalendhi has attended a Faculty Development Program organized by PALS Vlabs in Domain Intensive Training on 01.03.2023.
• Mr. R. Subash has attended a Faculty Development Program organized by Naan Mudhalvan partnered with TANCAM in Product Design & Manufacturing 3D Surface Modelling from 13.02.2023 till 17.02.2023.
• Mr. N. Sibi has attended a Faculty Development Program organized by Naan Mudhalvan partnered with UIPath in Robotic Process Automation on 11.02.2023 & 12.02.2023.
• Mr. N. Sibi has attended a Faculty Development Program organized by TLC, IIT Madras in How Teachers can make a difference from 01.12.2022 till 03.12.2022.
• Mr. V. Pugalendhi has attended a Faculty Development Program organized by PALS Vlabs in Virtual Labs from 09.11.2022 till 11.11.2022.
• Mr. V. Pugalendhi has attended a Faculty Development Program organized by Naan Mudhalvan in Machine Learning for Mechanical Engineers on 11.10.2022.
• Dr. P. Santhanamoorthy has attended a Faculty Development Program organized by Naan Mudhalvan partnered with Cousera in E Mobility for Mechanical Engineers on 06.10.2022.
• Mr. N. Sibi has attended a Faculty Development Program organized by Naan Mudhalvan partnered with SkillSonics in Robotics Simulation for Manufacturing on 19.09.2022 & 20.09.2022.
• Mr. R. Subash has attended a Faculty Development Program organized by Autodesk in Fusion 360 on 19.09.2022 & 20.09.2022.
• Mr. R. Subash has attended a Faculty Development Program organized by Department of Computer Science and Engineering, Sree Vidyanikethan Engineering College in Innovation & Entrepreneurship from 02.07.2022 till 23.07.2022.
• Mr. V. Pugalendhi has attended a Faculty Development Program organized by SRM Easwari Engineering College in Advanced Materials & Manufacturing Technology from 23.02.2022 till 10.03.2022.
• M Durairaj has attended a Two days Faculty Development Program organized by FIREBIRD Research Institute of Research in Management, Coimbatore on 11th – 12th March 2017.
• M Durairaj has attended a One day FDP on “Role of Faculty In Addressing Challenges in Master Classes”, at Tagore Engineering College on 29th September 2016.
• M Durairaj has attended a Two days FDP on “Advances in Gas Dynamics & Jet Propulsion” on 14th – 16th December 2017.
• M Durairaj has attended a Two days FDP on “Recent Development in Non-Destructive Testing and Materials” on 1st & 2nd December 2016.
• M Durairaj has attended a Two days FDP on “Recent Developments in Engineering Materials & Nano Technology on 10th & 11th December 2018.
• M Durairaj has attended a Two days FDP on “Recent Developments in Engineering Materials & Nano Technology on 10th & 11th December 2018.
• M Durairaj has attended a Ten days FDP on ‘Finite Element Analysis” from 23rd Februray 2007 to 3rd March 2007 at Anna University, Chennai.
• MP Natarajan has attended a Two days FDP on Recent Developments in Non Destructive Testing and Materials from 1 -12- 16 to 2-12-16
• MP Natarajan has attended a Two days FDP on Recent Developments in Engineering Materials & Nano Technology from 10 -12- 18 to 11-12-18
• N Venkatesan,Mr. T Rajesh Babu,Mr. CB Sekar haveParticipated Two Days”recent developments in NON destructive testing and materials on 1st and 2nd dec 2016 ” TAGORE ENGINEERING COLLEGE (Approved by AICTE, Affiliated to Anna University, Accredited by NAAC) Vandalur- Kelabakkam Road, Chennai
• R. Sasidharan has attended a six days FDP on “Professional Ethics”, at Anna University conducted between 19-07-2007 till 24-07-2007.
• T Rajesh Babu, Mr. CB Sekar, Mr. M Mustafa Kamal Basha haveParticipated Three Days “FACULTY DEVELOPMENT PROGRAMME on ADVANCES IN GASDYNAMICS & JET PROPULSION14th Dec to 16th Dec, 2017 , Department of Aeronautical &Mechanical Engineering , TAGORE ENGINEERING COLLEGE (Approved by AICTE, Affiliated to Anna University, Accredited by NAAC) Vandalur- Kelabakkam Road, Chennai
• V Pugalendhi has attended a One week FDP on “Automobile Engineering” at MIT Campus from 03-12-12 till 09-12-12.
• V Pugalendhi, Mr. M Mustafa Kamal Basha, Mr R Praveen have attended a Two day FDP on “Non Destructive Testing & Materials” (RDNDT&M 16) on 1&2 December 2016.
• V Pugalendhi, Mr. R Praveen, Mr. N Sibi have attended a Three day FDP on “Advances in Gas Dynamics and Jet Propulsion” held on 14 to 16 December 2017.
• V Pugalendhi has attended a One Week FDP on “Two and Three Wheeler” at SVCE, Pennalur from 27-11-17 till 05-12-17.
• V Pugalendhi has attended a Five Days FDP on “Vehicle Dynamics using MATLAB” at SVCE, Pennalur from 21-11-2018 till 01-12-2018.
• V Pugalendhi, Mr. KM Vadivel, Mr. S Shiva Swabnil, Mr. R Senthil Kumar have attended a Two days FDP on “Recent Developments in Engineering Materials & Nanotechnology at Tagore Engineering College on 10th and 11th Dec 2018.
• N Arunkumar has Participated in a faculty development program organized by the spoken tutorial project, IIT Bombay on 29th Nov 2012
• R Praveen Two days FDP on ” Materials and Metallurgy” at Tagore Engineering college, Chennai.
• Mr P Shriram Kumaar Pandian has attended a One day FDP on “ Changing Pedagogy in current scenario” on 29 January 2016
• Mr P Shriram Kumaar Pandian has attended a One day international FDP on “ Role of faculty in addressing challenges in masterclasses” organized by Tagore engineering college in association with IET – UK on 29 September 2016.
• Mr P Shriram Kumaar Pandian, Mr. R Senthil Kumar have attended a Two day FDP on “Non Destructive Testing & Materials” (RDNDT&M 16) on 1&2 December 2016.
• Mr P Shriram Kumaar Pandian has attended a Two day FDP on “Stress Management” conducted by ICT academy on 29 & 30 June 2017 at Adhi College of Engineering and Technology, Kanchipuram..
• Mr P Shriram Kumaar Pandian, Mr S Shiva Swabnil have attended a Three day FDP on “Advances in Gas Dynamics and Jet Propulsion” held on 14 to 16 December 2017.
• Mr P Shriram Kumaar Pandian has attended a Seven day FDP programme on “Two and Three wheeler” conducted by Centre for faculty development at Sri Venkateshwara College of Engineering from 27 November to 5 December 2017.
• Mr P Shriram Kumaar Pandian, Mr. N Sibi have attended a Two days FDP on “Recent Developments in Engineering Materials & Nanotechnology at Tagore Engineering College on 10th and 11th Dec 2018.
• Mr S Shiva Swabnil has attended a One week FDP on “Engineering materials and metallurgy”conducted by Anna university mit campus on5th Dec 2016
• Mr S Shiva Swabnil has attended a Two day FDP on “Stress Management” conducted by ICT academy on 29 & 30 June 2017 at Adhi College of Engineering and Technology, Kanchipuram..
• R Senthil Kumar has attended a Twelve days FDP held at St.Joseph’s Institute of Technology, OMR, Chennai

• Mr.N.Sibi has participated in a One Day Workshop on “Mega Entrepreneurship Program” organized by Self-Reliant Bharat Mission & Sairam Institution on 04.02.2023.
• Dr.Durairaj, Mr. R. Subash, Mr. V. Pugalendhi, Mr. N. Sibi have attended a One Day Workshop on “Research Proposal Writing” organized by the Department of Electrical and Electronics Engineering, Tagore Engineering College on 02.09.2022.
• Mr.V.Pugalendhi has attended a One Day Workshop on “Modern Mobility Systems” organized by the Department of Automobile Engineering, Easwari Engineering College on 14.05.2022.
• Mr.R.Subash, Mr. V. Pugalendhi have attended a One Day Workshop on “Recent Advancements in Metal 3D Printing” organized by the Department of Mechanical Engineering, SSN Engineering College on 12.03.2022.
• M.Durairaj has participated in the “One day Awareness Workshop on IPR ”which was conducted by TEC.
• G. Saravanan has participated in the “One day Awareness Workshop on IPR”on IPR which was conducted by TEC.
• Musthafa Kamal Basha has participated in the “One day Awareness Workshop on IPR” which was conducted by TEC.
• C.B.Sekar has participated in the “One day Awareness Workshop on IPR” which was conducted by TEC.
• Musthafa Kamal Basha has attended one day workshop on ‘ ART OF THESIS WRITING’ on Oct12,2019 at Loyal College, Nungambakkam, Chennai.
• C.B.Sekar has attended on One day workshop on “Internet of Things in Supply Chain Management (IOTSCM-2019) “, which was held on 27-28 June, 2019 at IIITDM Kancheepuram,
• P.Shriram Kumaar Pandian has attended Three days Workshop on ”Recent Trends in E Vehicle” from 21.11.19 to 23.11.19 at St.Joesph Institute of Technology.
• Durairaj has attended a One-day Workshop on Quality Improvement Programme – OBE – SAR PREPARATION at Jerusalem Engineering College, FEB 29- MARCH 02,206.
• Durairaj has attended a One-day workshop on “360° of Teaching Excellence Reinventing Teaching for Gen Next”, at Tagore Engineering College on 3rd March 2017.
• Durairaj has attended a Two days’ workshop on “Recent Trends in Manufacturing Processes” on Aug 7th & 8th 2012 at Tagore Engineering college
• Durairaj has attended a Five days’ workshop on Mission 10X programme were conducted along with Wipro Technologies from 22nd November 2010 to 26th November 2010.
• MP Natarajan has attended a One day workshop on “Advances in Manufacturing Technology at MIT Campus, Anna University on 10.03.07.
• MP Natarajan has attended a Two day workshop on “Recent Trends in Non- Destructive Evaluation of Materials Advances at MIT Campus, Anna University on 24.3.08 and 25.03.08
• MP Natarajan has attended a One day workshop on “Bridging the gap in the learning process between school and college Education at Jerusalem College of Engineering on 13.10.12.
• MP Natarajan has attended a One day workshop on “Web Based Teaching Learning & assessment” at Tagore Engineering College on 17.12.15
• MP Natarajan has attended a One day workshop on “International FAP on Role of Faculty in Addressing Challenges in Master Clasess” at Tagore Engineering College on 29.09.16
• MP Natarajan has attended a One day workshop on “Commercialization of Intellectual property and Quality Assurance in Higher Education” at Crescent University on 09.02.17
• MP Natarajan has attended a One day workshop on “Intellectual Property Rights and Innovation at Jerusalem College of Engineering on 08.8.18.
• N Venkatesan as Participated in the National Workshop on “Taguchi method based Quality Engineering Techniques” at Arunai Engineering College during Feb 18th –20th –2001.
• N Venkatesan as Participated in the National Workshop on “Entrepreneurship development for Teachers in Technical Institutions” at Anna University, Chennai, During Feb 6th- 8th- 2003.
• N Venkatesan as Participated in the National Workshop on “Computer Aided Design” at Milam Engineering College, Mailam, during May 2nd to 7th –2005.
• T Rajesh Babu, Mr. CB Sekar, Mr. M Mustafa Kamal Basha, Mr. Praveen have Participated in a two days workshop on “One Day National Workshop on Welding codes and standards 24th February – 2018. Department of Mechanical Engineering SSN College of Engineering Kalavakkam – 603 110.
• R Subash has a Lean Six Sigma Yellow Belt Certification Program at New Prince Shri Bhavanai College Of Engineering & Technology on 1 st and 2 nd September 2016.
• V Pugalendhi has attended a One day Workshop on “ Web based teaching learning & assessment” Organised by TEC jointly with ULEKTZ learning private limited on 17 December 2017.
• G Saravanan has Participated two days workshop on “Fail Safe Design, Early Detection & Avoiding Future Recurrence” held on 28th and 29th october 2013 organized by Department of Mechanical Engineering, College of Engineering Guindy Campus (CEGC), Anna University, Chennai-25
• G Saravanan has Participated two days workshop on “Metallurgy And Materials For Practicing Engineers & Researchers” held on 21st and 22nd of September 2013 organized by Indian Institute of Metals Chapter & Department of Metallurgical and Materials Engineering, Indian institute of Technology Madras (IIT- Madras)
• N Arunkumar has Attended a Two day course on Metallurgy and Materials for Practicing Engineers & Researchers Organized Jointly of Metals Chennai Chapter & Dept. of Metallurgical and Materials Eng., Indian Institute of Technology Madras on 21st and 22nd of Sep 2013.
• N Arunkumar has Attended a Two Day National Level Workshop On ‘’Advanced Engineering Optimization and Modeling using MATLAB & SCILAB” on 29th & 30th November 2012
• R Praveen has attended a One day workshop on ” Recent developments in welding technology “, at SSN college of engineering , Chennai. April 2017
• Shriram Kumaar Pandian has attended a One day workshop on “ New approaches in welding engineering” held on 7 April 2017 organised by SSN college of Engineering, Chennai.
• Shriram Kumaar Pandian has attended a One day Workshop on “ Web based teaching learning & assessment” Organised by TEC jointly with ULEKTZ learning private limited on 17 December 2017.
• Shriram Kumaar Pandian has attended a One day workshop on “ Welding codes and standards” held on 24 march 2018.
• N Sibi has attended a Two weeks ISTE Workshop on “Control Systems” conducted by Indian Institute of Technology Kharagpur at Vel’s University from 02-12-2014 till 12-12-2014.
• N Sibi has attended a Two weeks ISTE Workshop on Environmental Studies conducted by IIT Bombay under the National Mission on Education through ICT (MHRD, Govt. of India) at Vel’s University, Chennai from 02-06-2015 till 12-06-2015.
• N Sibi has attended a One day Workshop on “Recent Trends in Automobile Engineering” at Vel’s University, Chennai on 29-03-2016.
• N Sibi has attended a One day Workshop on “Product Lifecycle Management” by Adroitec Engineering Solutions Pvt Ltd on 30-11-2017.
• R Senthil Kumar has attended a One day workshop on “Author Workshop ” held on 19 November 2018 organised by Anna University Library, Chennai.
• R Senthil Kumar has attended a Two days Workshop on “ Industrial Robotics ” Organised by St.Joseph’s Institute of Technology, OMR, Chennai on 9 and 10 November 2018.
• R Senthil Kumar has attended a One day workshop on “Concept development for inspiring innovations to bind science and society” held on 5 October 2017 at AMET Chennai.
• R Senthil Kumar has attended a 360◦ of Teaching excellence : Reinventing teaching for Gen Next” organised by Tagore engineering college on 3 march 2017.
• R Senthil Kumar has attended a Two days workshop on “ Green manufacturing concepts” sponsored by UGC held 16 & 17 February 2015 held at MIT campus Anna university.
• R Senthil Kumar has attended a One day workshop on Recent trends in AWJM held on 19 Feb 2016 at MIT campus Anna University.
• N Senguttuvan has attended a Two days’ Workshop on “Recent Developments in Non-Destructive Testing and Materials”, at Tagore Engineering College, 1st and 2nd Dec, 2016.
• N Senguttuvan has attended a One day workshop on “Web Based Teaching Learning & Assessment” at Tagore Engineering College, Chennai 17th Dec ,2015.
• KM Vadivel has attended a One day Workshop on” SIMENS EDUCATION DAY” Organized by Simens and Vi Microsystem Pvt ltd at Hotel Western, Chennai April-08-2017

• Dr. P. Santhanamoorthy, Mr. G. Ramesh, Mr. R. Subash, Mr. V. Pugalendhi, Mr. N. Sibi have attended a International Conference on “Recent Advances in Science, Engineering and Management” held on 25.01.2023 at Tagore Engineering College

• Mr. N. Sibi has attended a Webinar on Latest Research in Semiconductor Materials (Graphene & 2D Materials) Application of AI in Computer Image & Neuro Science, organized by EduCare Taiwan with Chang Gung on 26.02.2023.
• Mr. N. Sibi has attended a Webinar on Latest Research in Application of AI in Smart Manufacturing, Image Processing IC, Business Intelligence & Text Mining organized by EduCare Taiwan with Yuan Ze University (YZU), Taiwan on 29.01.2023.
• Mr. V. Pugalendhi, Mr. N. Sibi have attended a Webinar on Basics of Research Paper Writing organized by Department of Research and Publication, A2Z Edu Learning Hub LLP, India on 22.09.2022.
• Mr. R. Subash, Mr. V. Pugalendhi, Mr. N. Sibi have attended a Seminar on Future Technologies in Automobiles organized by PALS Technology Speaks on 30.08.2022.